The Water based stencil cleaning machine is mainly used for cleaning SMT stencil in electronic industry with water-based cleaning liquid. Use the most advanced cleaning technology in the industry, achieve 100% clean and environmental protection. The machine consists of cleaning system, rinsing system, drying system and filtration system. The machine uses electric power and compressed air as the energy source, and manually puts the stencil into the cleaning room. After setting the cleaning, rinsing, drying and other relevant parameters in the touch screen, press the start button, and the stencil will be automatically cleaned, rinsed and dried. When the set cleaning process is finished, it will automatically stop running and reset, so as to realize the next workflow. This machine is very convenient for the operator to clean the stencil, and Chief mate improves production efficiency and quality. It is a new, high-performance automatic cleaning equipment. The equipment is rinsed with water-based liquid detergent and DI water, without any potential safety hazard and no harm to personnel. Specification Dimension (mm) L1300*W1400*H1850 Applicable stencil size (mm) L740 * W740 * H40(max) Special size to be customized Power supply AC380V 50HZ Total power 30KW Range of resistivity tester 0~18MΩ Gas source 0.4~0.7Mpa Source of water 0.2~0.4Mpa Exhaust air port Ø125 Cleaning/Rinsing liquid tank volume 42L Optimum liquid usage 35L*2PCS Cleaning fluid isolation time 40S Clean time 3 ~ 8Min Rinse time 3 ~ 10Min Dry time 3 ~ 10Min